The light-weight S340e pump is portable enough to go anywhere on a job site, fitting into tight spaces so you can spray with ease. In addition, this pump plugs into a standard 120V wall outlet – or an appropriately-sized generator – allowing your crew to get up and running right away. The ToughTek S340e Stucco pump handles stucco and EIFS materials. For stucco applications, it handles scratch coats, brown coats and finish coats. For EIFS applications, it can handle air/water-resistive barrier materials, EIFS base coats and finish coats.
Engineered with Graco’s proprietary piston pump technology, the ToughTek S340e can easily handle repair mortars with small to medium sized aggregate. The S340e can also deliver all materials through long hose lengths, allowing you to spray farther distances and get the job done sooner. This piston pump will save time, speed up the process and increase your profits by using a pump to spray and finish-trowel the material instead of using the traditional hawk and trowel method.
|
Pump Type |
2-ball piston |
|
Maximum Working Pressure (psi) |
600 |
|
Maximum Spray Pressure (PSI) |
500 |
|
Maximum Output |
Up to 40 bags/hour |
|
Volume Control |
Variable |
|
Maximum Hose Length (ft) |
100 |
|
Conveying Distance |
Up to 50 ft (15 m) Vertically |
|
Hopper Capacity |
20 gal (76 L) |
|
Fluid Inlet Size (in) |
3 |
|
Fluid Outlet Size (in) |
1-1/2 |
|
Fluid Outlet Thread Size |
NPT |
|
Input Voltage (V ac) |
120 |
|
Maximum Flow Rate (GPM) |
6.5 |
|
Material Application |
Liquid Waterproofing |
|
Maximum Input Amperage (A) |
15 |
| Maximum Sound Pressure Level (dB(A)) |
80.5 |
|
Hopper Opening |
22.5" W x 14" D |
|
Hopper/Filling Height |
26 in |
|
Pump Outlet Size |
1.5" cam groove |
|
Dimensions |
45.5" L x 24" W x 38" H |
|
Weight (lb) |
210 |
|
Chemical Compatibility |
Water based materials |
|
Wetted Material |
Aluminum, stainless steel, PTFE, UHMWPE, LLDPE, urethane |
ToughTek S340e System Demo
